Emotron FDU 2.0 series

Protection from damage and downtime
Smooth starts and stops protect your equipment. Reduced start currents result in smaller fuses, cables and energy bills. Controlled stops eliminate the risk of water hammer and other costly damage.

A built-in load monitor and a unique Load Curve Protection function protect your process by immediately detecting any situation that could cause inefficiency or damage. Early warnings and safety stops for over- and underloads allow preventive action.

Energy savings and optimized operation
Emotron FDU regulates flow and pressure by continuously adapting motor speed. No energy wasted and no unnecessary equipment wear. A sleep function further reduces energy consumption by pausing the motor when it is not needed to be run. An automatic pump rinsing function increases efficiency.

Multiple pump or compressor control is a reliable and cost-efficient method of keeping a constant flow or pressure despite varying demands. Emotron FDU controls up to seven drives.

User-friendly and reliable operation
Operation parameters can be set in your own process units – m3/min, bar, Pascal, Celsius etc. – making monitoring easier and more reliable. The removable control panel has a copy function for transferring settings to other Emotron FDU units. You can switch between local and remote control by the push of a key on the control panel. The built- in programmable logical functions, comparators and timers means that external PLC or relays in many cases can be avoided.

Available in IP20/21 and IP54 versions
Emotron FDU is available in IP20/21and IP54 versions. The robust steel construction in IP54 version means that you can install your AC drive close to the application, which saves the cost of cabinets and long motor cables.The 300-1,500 A units (IP20 modules) is also available in compact CG-designed IP54 cabinets. IP20/21 series 25-244 A are optimised for mounting in control cabinets (IP20) or on electrical room wall (IP21). Robust and compact design, easy access to power terminals. Extended temperature range up to 55 °C.

Simplified maintenance
Should a process or drive problem occur a full status report will be generated for each event in fault logger. You can quickly identify the cause and take corrective measures. Maintenance is simplified thanks to a minimum of easy accessible mechanical parts and by using fold-out power modules in bigger powers.

Name Emotron FDU 2.0
Rated power 0.75-3,000 kW
Supply voltage 230-690 V, 3-phase
Rated current 2.5-3,000 A
Protection class IP54
Approvals CE, UL, DNV, GOST R
Download Brochure Contact us See references